Anesthetic Products
Lepu Medical > Product Information > Anesthetic Products > Disposable Arterial Blood Samp..


Disposable Arterial Blood Sampler









Product Features


Standard Type


·  Two sampling methods: Preset Type / Pumping Type

·  The syringe plunger is made of anti-tear, high-elastic ventilated silicon membrane, which ensures its excellent sliding performance and reduce the leakage at the same time. 
 

·  The unique build-in ventilated plunger could expel the residual air automatically, then self-seal when touching with blood so that the blood sample could be sealed effectively.

·  The special technique of heparin coating inside the syringe ensures the sufficient mixture of heparin and blood, providing more accurate result.     

·  The sealing cap design could seal the sampler completely, totally avoid test error caused by the mixed air, and provide better condition for sample’s storage and transportation.     




Operation Steps (Standard Type)

 





Safety Type


·  
Same syringe with standard type.

·  Special structure makes the safety shield an integral part of the needle.

·   Fully integrated shield offers enhanced safety for healthcare operators.

·   Single-handed activation of the safety design provides simple and safe manipulation.

·   After taking the blood sample, push or knock the shield gently to lock. The shield engages over the needle with an audible click and irreversibly locking, which avoids other people’s injuries if the needle is exposed.




Operation Steps (Safety Type)

 

 







Indications and Warnings



·  In case of influencing the testing result, air must be prevented from entering when taking the arterial blood.

·  Be very careful when taking blood sample from any artery. The insertion of needle cannot be too deep to pierce the other side of the arterial wall.

·  Take care of the puncture point after withdrawing the needle, in case of bleeding and hematoma.

·  Observe the syringe after sampling. If the bubble appears, flip the syringe wall to expel it. The bubble will increase the result of PaO2 and pH, and decrease the result of PaCO2.

·  After sealing the sample, rotate the syringe gently immediately to mix the blood sample with heparin, and please mix the sample again before analyzing. If there is visible precipitate in the sample, please mix it for few more minutes to prevent from the influence on the accuracy of ctHb.

·  The sample should be sent to test immediately. If the blood gas analysis cannot be finished in fifteen minutes, the sample needs to store in the 4C refrigerator (or in the 4C ice water) within two hours to prevent from the reducing of PaO2 and pH, and the increasing of PaCO2 and free calcium ions. 

·  Record the sampling time, method of oxygen inhalation, oxygen concentration, oxygen flow rate, other parameters of mechanical breath and body temperature when the sample is sent to test.  

 










Contraindications



·  Patients with damaged skin or infection at puncture point; or the patients with bleeding and clotting abnormalities.

·  Take the Allen test before taking sample from the radial artery. Contraindicate if the test result is positive or suspected positive.










Ordering Information

 

Normal Tape

Ordering No.

Syringe 
Volume (mL)

Recommended
Fill Volume (mL)

Units of Heparin (IU)

Gauge

Needle Length (mm)

Applications

007-2232

3

1 (1.6 max.)

80

22G

32

Adult femoral artery

007-2225

3

1 (1.6 max.)

80

22G

25

Adult radial artery

007-2315

3

1 (1.6 max.)

80

23G

15

Children

007-2615

3

1 (1.6 max.)

80

26G

15

Infant

007-0000

3

1 (1.6 max.)

80

N/A

N/A

Without needle

 

Safety Tape

Ordering No.

Syringe
Volume (mL)

Recommended
Fill Volume (mL)

Units of Heparin (IU)

Gauge

Needle Length (mm)

Applications

007-2232(S)

3

1 (1.6 max.)

80

22G

32

Adult femoral artery

007-2225(S)

3

1 (1.6 max.)

80

22G

25

Adult radial artery

007-2315(S)

3

1 (1.6 max.)

80

23G

15

Children

007-2615(S)

3

1 (1.6 max.)

80

26G

15

Infant










Contact Us

 

If you have any query about the product information, please contact our International Sales & Marketing Department: international@lepumedical.com


SOURCE: Lepu Medical International Sales & Marketing Department


  SITE MAP   RECRUITMENT   CONTACT US
POWERED BY LEPU MEDICAL
© Copyright  1999-2014  lepumedical.com,  All rights reserved
版权所有    乐普(北京)医疗器械股份有限公司    京ICP备13012321号